TM 5-3895-369-14
5-11. CYLINDER BLOCK REPAIR (CONT).
(13)
Measure camshaft bushing (13) at position
E. Measurement must be no greater than
2.1317 in. (54.146 mm). If measurement is
beyond limit, replace camshaft bushing.
NOTE
Follow-on Maintenance:
•
Install crankshaft (para 5-14).
•
Install camshaft (para 5-24).
•
Install cylinder head assembly (para 5-12).
•
Install oil cooler (para 4-34).
•
Install engine assembly (para 5-8).
END OF TASK
5-126
