TM 5-3895-369-14
NOTE
Tag and mark wires before removal.
Cut plastic ties as necessary to remove
wires.
(2)
Tag, mark, and disconnect connector (5)
from horn (6).
(3)
Remove wire (7) from engine (8).
(4)
(5)
(6)
(7)
(8)
(9)
Remove nut (9), lockwasher (10), and
washer (11). Discard lockwasher.
Tag, mark, and remove wire (12) from
temperature sensor (13).
Tag, mark, and remove connector (14) from
fuel injector solenoid (15).
Remove nut (16) and lockwasher (17).
Discard lo&washer.
Remove wire (18) from oil sending unit (19).
Note position and separate harness (20)
from engine (8).
5-103
