TM 5-3895-369-14
4-166. ADDITIVE SYSTEM LOWER HOSE AND PIPING REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Cleaning/Inspection
c. Installation
Tools
Tool kit, general mechanic’s: automotive
Wrench, torque
Equipment Condition
TM or Para
Para 4-168
Condition Description
Additive system rotor
hose disconnected from
Suitable container (capacity 5 gal. [19 liters])
additive system pump
piping.
MateriulslParts
Lockwashers (4)
Compound, sealing, pipe thread (item 17,
appendix E)
a.
Removal.
Spilled bituminous fluid is slippery.
Clean up immediately or injury to
personnel may result.
(1) Close valve (1).
NOTE
Place suitable container with a 5 gallon
(19 liters) capacity under connector to
catch spilling fluid.
(2)
Loosen fitting (2) and remove hose (3) from
elbow (4).
4-537
