TM 5-3895-369-14
4-158. ROTOR DEPTH CONTROL BAR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: automotive
Wrench, torque
Materials/Parts
Locknut
Equipment Condition
TM or Para
Para 4-156
Para 4-125
Condition Description
Bar stops and springs
removed.
Hood removed.
a.
b.
Removal.
(1)
Remove locknut (1) and screw (2) from
hood lift bracket (3). Discard locknut.
(2)
Remove rotor depth control bar (4) from
hood lift control bracket (3).
Installation. Install rotor depth control bar (4)
on hood lift control bracket (3) with screw (2) and
locknut (1). Tighten locknut 280 lb-ft (380 N•m).
NOTE
Follow-on Maintenance:
Install hood (para 4-125).
Install bar stops and springs (para 4-156).
END OF TASK
4-521
