TM 5-3895-369-14
4-148. HYDRAULIC CROSS REPLACEMENT/REPAIR.
This task covers:
a. Removal
b. Disassembly
INITIAL SETUP
c. Cleaning/Inspection
d. Assembly
e. Installation
Tools
Materials/Parts
Tool kit, general mechanic’s: automotive
Solvent, drycleaning (item 54, appendix E)
Tag, identification (item 55, appendix E)
Suitable container (capacity 1 gal. [3.8 liters])
Materials/Parts
Lockwashers (2)
Cloth, lint-free (item 12, appendix E)
Fluid, hydraulic (item 23, appendix E)
Sealant, hydraulic (item 52, appendix E)
Equipment Condition
TM or Para
Para 2-15
Para 4-132
Para 2-18
Condition Description
Aft floor deck raised.
Forward floor plate
removed.
Hydraulic valve shut off
a.
Removal.
Hydraulic fluid is very slippery and can cause falls. To avoid injury, wipe up fluid with rags.
NOTE
Place suitable container with a 1 gallon (3.8 liters) capacity under cross to catch spilling fluid.
Tag and mark all hoses prior to removal.
(1)
Tag, mark, and disconnect hose (1) from fitting (2) on flow control valve (3).
4-480
