4-142. HYDRULICTM 5-3895-369-14b. Cleaning/Inspection.Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; useonly in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors.Keep away from heat or flame. Never smoke when using solvent; the flashpoint for type Idrycleaning solvent is 100°F (38°C) and for type II is 140°F (60°C). Failure to do so may result ininjury or death to personnel.If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately flusheyes with water and get immediate medical attention.Compressed air used for cleaning purposes must not exceed 30 psi (207 kPa). Use only with effectivechip guarding and personal protective equipment (goggles/shield, gloves, etc.).(1)Clean screens with drycleaning solvent and dry with compressed air.(2)Inspect screens for holes.(3)Replace screens if damaged.c.Installation.(1)Install screen (3) in tank (2).(2)Install screen (1) in tank (2).NOTEFollow-on Maintenance:Install hydraulic cap plates (para 4-49).Fill hydraulic tank (para 4-29).END OF TASK4-460
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
