TM 5-3895-369-14
4-131. REAR FENDER REPLACEMENT.
This task covers:
a. Removal
b. Installation
Equipment Condition
INITINAL SETUP
Tools
Tool kit, general mechanic’s: automotive
TM or Para
Condition Description
Materials/Parts
Lockwashers (8)
Para 4-50
Fuel can assembly,
ratchet, and holder
removed.
Personnel Required
MOS62B, Construction equipment repairer (2)
Para 4-81
Rear floodlights removed
a.
Removal.
NOTE
Both rear fenders are removed the same
way. Left side shown.
(1)
Remove two nuts (1) lockwashers (2) four
washers (3) and two screws (4) from front
fender bracket (5). Discard lockwashers.
(2)
Remove two nuts (6), lockwashers (7), four
washers (8) and screws (9). Discard
lockwashers.
(3)
Remove fender (11) from brackets (5
and 10).
(4)
Repeat steps (1) through (3) for other
fender.
b. Installation.
(1)
Position fender (11) on front and rear
brackets (5 and 10).
(2)
Install four screws (4 and 9), eight washers (3 and 8), four lockwashers (2 and 7) and nuts (1 and 6).
(3)
Repeat steps (1) and (2) for other fender.
NOTE
Follow-on Maintenance:
Install floodlights (para 4-81).
Install fuel can assembly, ratchet, and holder (para 4-50).
END OF TASK
4-443
