TM 5-3895-369-l4
4-114. REAR WHEEL REPLACEMENT.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools
Personnel Required
Tool kit, general mechanic’s: automotive
MOS62B, Construction equipment repairer (2)
Lifting jack (10,000 lb capacity)
Wrench, torque
a.
Removal.
Do not place jack under any location except specific jacking points. Otherwise, vehicle may fall
during maintenance and cause injury or death to personnel.
Rear wheel weighs 375 lbs (170 kg) and should not be allowed to fall. Injury or death to personnel
could result.
(1)
Position jack under jacking point (para 4-17) on rear hitching frame and lift vehicle.
NOTE
Remove nuts in a cross-pattern fashion.
(2)
Loosen 10 nuts (1) alternately on rear wheel (2).
4-404
