TM 5-3895-369-14
4-107. MASTER CYLINDER REPLACEMENT (CONT).
(4)
Remove three screws (8), lockwashers (9)
and master cylinder (3) from bracket (10).
Discard lockwashers.
b. Cleaning/Inspection.
(1)
(2)
(3)
Check brake tubes for cracks, holes, or rust.
Check fittings for good connection and
leaks.
Replace all damaged parts.
c. Installation.
(1)
Install master cylinder (3) on bracket (10)
with three lockwashers (9) and screws (8).
(3)
Install rubber boot (7) and linkage (6) on
master cylinder (3).
(4)
Install tube (5) and tighten fitting (4).
(5)
Install tube (2) and tighten fitting (1).
NOTE
Follow-on Maintenance:
Fill master cylinder with brake fluid (para 4-28).
Lower aft floor deck (para 2-15).
Bleed brake lines (4-110).
END OF TASK
4-384
