TM 5-3895-369-14
4-69. BELT TENSIONER REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Cleaning/Inspection
c. Installation
Tools
Tool kit, general mechanics: automotive
Wrench, torque
Materials/Parts
Equipment Condition
TM or Para
Para 4-90
Para 4-68
Condition Description
Negative battery cables
disconnected.
Drive belt removed.
Cloth, lint-free (item 12, appendix E)
Paper, abrasive (item 49, appendix E)
a. Removal.
(1)
Remove screw (1) and belt tensioner (2)
from bracket (3).
(2)
Remove two screws (4) and bracket (3) from
cylinder head (5).
(3)
Inspect belt tensioner (2) bearing. If belt
tensioner rotates freely with no rough spots,
do not replace.
b. Installation.
(1)
Install bracket (3) on cylinder head (5) with
two screws (4). Tighten screws 216 lb-in
(24 N.m).
(3)
Install belt tensioner (2) on bracket (3) with
screw (1). Tighten screw 32 lb-ft (43 N.m).
NOTE
Follow-on Maintenance:
Install drive belt (para 4-68).
Connect negative battery cables
(para 4-90).
END OF TASK
4-269
