TM 5-3895-369-14
4-53. FUEL SEDIMENT BOWL REPLACEMENT/REPAIR.
This task covers:
a. Removal
c. Cleaning/Inspection
b. Disassembly
d. Assembly
e. Installation
INITIAL SETUP
Tools
Tool kit, general mechanics: automotive
Wrench, torque
Materials/Parts
Solvent, drycleaning (item 54, appendix E)
Lockwashers (2)
Preformed packings (2)
Cloth, lint-free (item 12, appendix E)
Equipment
Condition
TM or Para
Para 2-14
Condition Description
Left engine door opened.
Equipment
Condition
TM or Para
Para 4-47
Condition Description
Fuel lines and fittings
removed.
General Safety Instructions
If engine has previously been in operation,
allow engine time to cool before performing
procedure.
Fuel vapors are flammable.
Do not smoke within 50 ft. (15 m).
Fuel is very flammable and can explode
easily. To avoid serious injury or death:
Keep fuel away from open flame or
any spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Post signs that read “NO SMOKING
WITHIN 50 FEET (15.24 METERS)”
when working with open fuel, fuel
lines or fuel tanks.
a.
Removal.
(1)
Remove two reducers (1) and preformed
packings (2). Discard preformed packings.
(2)
Remove two nuts (3), lockwashers (4)
screws (5), and sediment bowl assembly (6)
from rear lifting bracket (7). Discard
lockwasher.
4-234
