TM 5-3895-369-14
TRANSMISSION LINKAGE
INSPECTION
(1) Remove dash panel (para 4-128).
(2) Disconnect negative battery cable
(para 4-90).
(3) Remove hydrostatic pump cover
(para 4-97).
(4)
Inspect linkage for damage or
misadjustment.
(a) If linkage is damaged, or mis-
adjusted, replace/adjust as
necessary (para 4-99 and 4-99).
(b) If linkage is OK indicates faulty
linkage between two-speed
range box and control lever
assembly.
TWO-SPEED LINKAGE
INSPECTION
(1) Remove forward floor plate
(par 4-132).
(2)
Raise aft floor deck (pare 2-15).
(3) Remove dash panel (para 4-128).
(4) Inspect linkage for damage or
misadjustment.
(a) If linkage is damaged or mis-
adjusted, replace/adjust as
necessary (para 4-95 and 4-96).
(b) If linkage is OK, notify supervisor.
4-147
