TM 5-3895-369-14
5-81. HYDRAULIC GEAR PUMP ASSEMBLY REPLACEMENT (CONT).
b. Installation.
Sealant causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and’
get immediate medical attention.
(1)
(2)
(3)
(4)
(5)
Coat threads of two screws (28) with
retaining compound.
Install gasket (29) and hydraulic pump (12)
on accessory drive (30) with two screws (28).
Tighten screws 60 lb-ft (80 N•m).
Install brace (27) with two lockwashers (26) and screws (25). Tighten screws 45 to 50 lb-ft (61 - 69 N •m).
Install screw (24) and locknut (23).
Install two preformed packings (21 and 22)
and hydraulic hoses (19 and 20) on
pump (12) with four coupling halves (17
and 18), eight lockwashers (15 and 16) and
screws (13 and 14). Tighten screws (13)
75 lb-ft (102 N •m). Tighten screws (14)
50 lb-ft (68 N •m).
5-480
