5-56. HYDROSTATIC
TM 5-3895-369-14
(11)
If removed, install pin (41).
(12)
Install bearing race (39), valve plate (40),
and gasket (38), in end cap (15).
(13)
Install motor end cap (15) and lifting
bracket (37) on motor (3) with eight
washers (36) and screws (34 and 35).
Tighten screws to 27 to 37 lb-ft
(36 - 50 N•m).
(14)
Install three preformed packings (33) and
plugs (32).
(15)
Install poppet (31), spring (30), shims (29),
preformed packing (28), and plug (27) in
manifold (14).
5-354
