TM 5-3895-369-14
5-90. ROTOR DRIVE ASSEMBLY REPAIR (CONT).
(46) Install gasket (48), bearing retainer (49), six
lockwashers (50), and screws (51) on gear
housing (21). Tighten screws 35 lb-ft
(47 Nm).
(47) Install gasket (52) and torque tube (53) to
gear housing (21) with four lockwashers (54)
and nuts (55). Tighten nuts 400 to 425 lb-ft
(542 - 576 Nm).
NOTE
Follow-on Maintenance:
Install rotor tine plates (para 5-91).
Install rotor drive shaft assembly (para 4-164).
END OF TASK
5-549