TM 5-3895-369-14
(8) If pinion or ring gear is bad, replace both as matched set.
(9) Replace all damaged parts.
c. Assembly.
(1) If original ring gear (1) is used, go to
step (2). If new ring gear is used, grind off
edge of new ring gear, as shown, for
installation clearance.
NOTE
Rivets, securing ring gear to hub, require
20 to 25 U.S. tons (18.1 - 22.7 metric tons)
of pressure per rivet. Use a suitable
hydraulic or mechanical press.
(2) Install ring gear (1) on hub (2) with
16 rivets (3).
5-536