TM 5-3895-369-14
(4) Remove four screws (4) and slide retaining
plate (5) away from cylinder body (2).
(5) Slide internal retaining ring (6) away from
cylinder body (2).
(6) Remove piston rod (1) and assembled parts
from cylinder body (2).
NOTE
Do not discard locknut unless damaged.
(7) Remove locknut (7) and piston (8) from
piston rod (1).
(8) Remove and discard preformed packing (9)
from piston rod (1).
(9) Remove and discard wear ring (10) and
crown seal (11) from piston (8).
5-507