TM 5-3895-369-14
(7) Check all threads for crossed or peeled condition.
(8) Lubricate bearings with grease before installing.
c.
Assembly.
Adhesive sealant causes immediate
bonding on contact with eyes, skin, or
clothing and also gives off harmful vapors.
Wear protective goggles and use in well-
ventilated area. If adhesive gets in eyes, try
to keep eyes open; flush eyes with water for
15 minutes and get immediate medical
attention.
(1) Apply hydraulic thread sealant to threads of
four plugs (19,18, and 17) and magnetic
plug (16) and install in drive housing (2).
(2) Apply hydraulic sealant to threads of four
plugs (15,14, and 13), reducer bushing (12),
and breather (11) and install in drive
housing (2).
5-227