TM 5-3895-369-14
b. Installation.
NOTE
If replacing timing pin alone, do steps (4 and 5) only.
(1) Install seal ring (7) in timing housing (5).
(2) Align matchmarks and install timing housing (5) on gear case (6) with two screws (4). Tighten screws
48 lb-in (5 Nm).
(3) Install preformed packing (3) on timing pin (2).
(4) Lubricate timing pin (2) with engine oil and install timing pin in timing housing (5) with retaining ring (1).
Retaining ring must be installed no deeper than 0.059 in. (1.5 mm).
(5) Install timing pin (2) and retaining ring (1). Retaining ring must be installed no deeper than
0.059 in. (1.5 mm).
NOTE
Follow-on maintenance: Close left engine door (para 2-14).
END OF TASK
5-185