TM 5-3895-369-14
(26) Assistant operates lifting device while
mechanic guides and removes engine (8)
from frame (53).
(27) Remove bearing (59) from flywheel (60).
b. Installation.
Engine weighs 1025 lbs (465 kg). Attach
suitable lifting device prior to installation
to prevent possible injury to personnel.
(1) Install bearing (59) in flywheel (60).
(2) Attach suitable lifting device to engine
lifting brackets (47).
(3) Assistant operates lifting device while
mechanic guides and positions engine (8) in
frame (53) without completely lowering.
(4) Install three brackets (43 and 56) on flywheel housing (57) with eight lockwashers (55) and screws (54).
Tighten screws 150 lb-ft (203 Nm).
(5) Position two shock pads (58) on frame (53) and install four screws (49) and locknuts (48) in brackets (50).
Lower rear of engine and tighten locknuts 30 lb-ft (41 Nm).
5-109