TM 5-3895-369-14
Installation.
c.
(1) Position cylinder (12) on axle (13).
(2) Install washer (11), screw (10), and
sleeve (9).
(3) Install washer (8). nut (7), and cotter pin (6).
(4) Install steering cylinder (12). pin (4), and
cotter pin (3) on right-hand knuckle (5).
(5) Connect two hydraulic hoses (2).
(6) Lower left end of front axle (1) and
remove jack.
NOTE
Follow-on Maintenance:
l
Check hydraulic fluid level and add as
needed (para 3-11).
l
Check for leaks.
END OF TASK
4-425