TM 5-3895-369-14
4-110. BLEEDING REAR BRAKES.
This task covers:
Bleeding
INITIAL SETUP
Tools
Personnel Required
Tool kit, general mechanic's: automotive
MOS62B, Construction vehicle repairer (2)
Suitable container (capacity 1 qt. [0.9 liter])
Equipment Condition
TM or Para
Condition Description
Materials/Parts
Raise aft floor deck.
BPS, brake fluid, silicone (item 21, appendix E)
Hose, fuel - 1/4 in. ID
NOTE
Both left- and right-hand rear wheel brakes are bled the same way. Right side shown.
Master cylinder must be tilled with brake fluid.
Place suitable container with a 1 qt. (0.9 liter) capacity under brake lines to catch spilling fluid.
(1) Remove rubber boot (1) and install 1/4 in. hose on bleed nipple (2).
(2) Mechanic holds hose over suitable container while assistant pumps brake pedal until brake pressure is felt.
4-394
