TM 5-3895-369-14
(9) Remove nut (20), lockwasher (21), and two clamps (22) from stud (23) and remove brake tube (2) and rear
half of brake tube (5). Discard lockwasher
(10) Note position and remove two adapters (3
and 6) and elbow (24) from master
cylinder (25).
b. Installation.
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(1) Coat threads of two adapters (3 and 6) with pipe thread sealing compound and install in elbow (24).
(2) Coat threads of elbow (24) with pipe thread sealing compound and install in master cylinder (25).
4-387
