TM 5-3895-369-14
(11) Remove eight nuts (22), lockwashers (23),
and screws (24) from two mounts (25).
Discard locknuts.
(12) Remove additive control box (3) from
firewall (26).
NOTE
If panel is to be stored, install cover on
panel with screws.
b. Installation.
NOTE
If cover was installed for storage, remove
screws and cover from panel.
(1) Position additive control box (3) on
firewall (26).
(2) Install eight screws (24), lockwashers (23),
and nuts (22) through two brackets (25).
(3) If removed, install preformed packing (21)
on elbow (20).
(4) Install six wires (15 and 17), elbow (20), and
nut (19) in additive control box (3).
4-301