TM 5-3895-369-14
4-64. WATER INLET REPLACEMENT.
This task covers:
b. Installation
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Condition Description
TM or Para
Tool kit, general mechanics: automotive
Coolant system drained.
Negative battery cables
Wrench, torque
disconnected.
Materials/Parts
Cloth, lint-free (item 12, appendix E)
Ring, seal
a. Removal.
(1) Loosen clamp (1) and remove hose (2).
(2) Remove three screws (3) and water inlet (4)
from engine block (5).
(3) If damaged, remove two pipe plugs (6) from
water inlet (4).
NOTE
Seal ring may stay with water inlet.
(4) Remove and discard seal ring (7) from
engine block (5).
b. Installation.
(1) Install seal ring (7) in engine block (5).
(2) If removed, install two pipe plugs (6) in
water inlet (4).
(3) Install water inlet (4) with three screws (3).
Tighten screws 32 lb-ft (44 N-m).
(4) Install hose (2) and tighten clamp (1).
NOTE
Follow-on Maintenance:
Fill coolant system (para 4-66).
Connect negative battery cables (para 4-90).
END OF TASK
4-262