TM 5-3895-369-14
b. Cleaning/Inspection.
(1) Clean plugs and around holes.
(2) Inspect all threads for crossed or peeled condition.
(3) Replace damaged plugs.
(4) Dispose of drained fluids according to local regulations.
c.
Filling.
(1) Install drain plug (1) in drive assembly (2).
(2) Fill drive assembly (2) with gear oil, as
specified by MIL-L-2105C, through fill
hole (3).
(3) Drive assembly (2) is full when oil level is
just below fill hole (3).
(4) When drive assembly is full, install fill plug
(4) in drive assembly (2).
END OF TASK
4-191