TM 5-3895-369-14
OIL PRESSURE GAUGE TEST
(1) Remove negative battery cable
(2) Remove instrument panel
(3) Power up STE/ICE-R to a known
good battery source (TM 9-4910-571-
12&P, in TK mode).
(4) Run continuity Test # 91.
(a) If oil pressure gauge fails
continuity test, replace gauge
(pare 4-74).
(b) If oil pressure gauge has
continuity indicates clogged oil
filter.
OIL FILTER INSPECTION
(1) Open right engine door (para 2-14).
(2) Remove oil filter (para 4-35).
(a) Check for obvious foreign
matter in oil fitter that would
cause blockage or restriction.
(b) If oil filter is OK, notify supervisor.
4-81
