TM 5-3895-359-14&P
APPENDIX I
REQUISITION PROCESSING
GENERAL INSTRUCTIONS
1. Preparation and Transmittal.
a. Requisitions will be prepared in the normal MILSTRIP format.
b. Requisitions transmitted by AUTODIN for NSN repair parts will be automatically routed by the Defense
Automated Addressing System (DAAS) to the responsible Federal Supply Class Manager.
c. Requisitions for non-NSN repair parts may be locally procured or requisitioned from the Defense Construction
Supply Center (DCSC), Columbus, Ohio. These requisitions, when properly coded, will be forwarded by the DAAS to
DCSC. When the Manufacturer's Part Number and the Federal Supply Code for the Manufacturer (FSCM) exceed
columns 8-22 of the requisition format (DD Form 1348-1), prepare an AOE/A05 requisition (DD Form 1348-6) and mail to
Commander
Defense Construction Supply Center
ATTN: DCSC-OSR
Columbus, OH 43215
2. Project Codes (Cols 57-59).
a. Project codes have been assigned to identify non-NSN repair parts requisitions placed on the wholesale
supply system.
b. Hawaii, Alaska and Panama, when submitting requisitions for non-NSN repair parts for this Commercial
Construction Equipment, are considered as OCONUS and will use coding applicable to OCONUS.
c. Refer to Tables 1 and 2 for applicable codes/formats.
3. Requisition Format.
Unique or Specific Coding applicable to repair parts requisitions for this equipment is furnished in Tables 1 and 2. Other
entries should conform to normal AR 725-50 MILSTRIP codes and formats.
I-1
