TM 5-3895-369-l4
Section I. REPAIR PARTS, SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC
EQUIPMENT AND SUPPORT EQUIPMENT
4-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50-970 or CTA 8-100, as applicable to your unit. Table 4-1 lists tool kits required and authorized for use
at unit maintenance. Reference code numbers listed in column one correspond to those listed in the same column on
the MAC.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
The Maintenance and Allocation Chart (MAC) identifies the authority and responsibility for maintenance tasks listed
in this manual. Tool kits, test equipment, and diagnostic equipment required for performing unit maintenance tasks
are also identified in the MAC. The Mixer, Rotary Tiller Repair Parts and Special Tools List (RPSTL), TM 5-3895-
369-24P lists special tools, TMDE, and support equipment required to perform unit support maintenance procedures
contained in this manual.
4-3. REPAIR PARTS.
Repair parts arc listed and illustrated in the Repair Parts and Special Tools List, TM 5-3895-369-24P, covering unit
maintenance for the vehicle.
Table 4-1. Authorized Unit Support Tool Kits
Tool or Test
Equipment
Ref Code
Maintenance
Level
Nomenclature
Tool Kit
Stock Number
1
0, F, H
0, F, H
Tool kit, general mechanic’s: automotive
Shop equipment, automotive maintenance and
repair: organizational maintenance
supplemental no. 1, less power
5180-00-177-7033
4910-00-754-0653
0, F, H
Shop equipment, automotive maintenance and
repair: organizational maintenance common
no. 1, less power
4910-00-754-0654
0 , F , H
Shop equipment, organizational repair: light
truck mounted
4910-01-236-0166
0, F, H
0, F, H
Test set, battery: AN/PSM-13
Analyzer set, engine: portable solid state
(ST-E/ICE-PM)
6625-00-868-8344
4910-01-222-6589
4-5
