TM 5-3895-372-34
Figure 2-7. Removal/lnstallation of Hydraulic Oil Pump.
(17) Remove the four base plate bolts (19 and 9), six flat washers (10), four lockwashers (12) and four nuts (15),
removing bracket (11).
(18) Remove the two adjusting lock screws (13), two nuts (14), four nuts (16), and two nuts (18). Remove plate (17).
(19) Inspect all fittings and mating flanges for crossed threads or burr Replace fittings as necessary and remove burrs
with fine sandpaper before assembly.
b. Installation.
2-20