TM 5-3895-372-24P
c. FIGURE AND ITEM NUMBER INDEX.
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) FIG.
column.
This column lists the
(1) STOCK NUMBER column. This column
number of the figure where the item Is identified/located
lists the NSN by National Item Identification Number
(NIIN) sequence. The NIIN consists of the last nine NSN
(2) ITEM column. The item number is that
I digits of the NSN (i.e., 5305-01-674-1467 ). When NIIN
number assigned to the item as it appears in the figure
using this column to locate an item, ignore the first 4
referenced in the adjacent figure number column.
digits of the NSN. However, the complete NSN should
be used when ordering Items by stock number.
(3) STOCK NUMBER column.
This column
lists the NSN for the item.
(2) FIG.
column.
This column lists the
number of the figure where the item Is Identified/located.
(4) CAGEC column. The Commercial and
The figures are in numerical order in Section II and
Government Entity (CAGE) Code (C) is a 5-digit alpha
Section III.
numeric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies the
(3) ITEM column. The item number identifies
item.
the item associated with the figure listed in the adjacent
FIG. column. This item is also identified by the NSN
(5) PART NUMBER column. Indicates the
listed on the same line.
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls
b. PART NUMBER INDEX. Part numbers in this
the design and characteristics of the item by means of
index are listed by part number in ascending
Its engineering drawings, specifications standards and
alphanumeric sequence (i.e., vertical arrangement of
inspection requirements to identify an item or range of
letter and number combination which places the first
items.
letter or digit of each group in order A through Z,
followed by the numbers 0 through 9 and each following
5. Special Information.
letter or digit in like order).
a. USABLE ON CODE . Not Applicable.
(1) CAGEC column. The Commercial and
Government Entity (CAGE) Code (C) is a 5-digit
b. FABRICATION
INSTRUCTIONS .
Bulk
alphanumeric code used to Identify the manufacturer,
materials required to manufacture items are listed in the
distributor, or Government agency, etc., that supplies the
Bulk Material Functional Group of this RPSTL. Part
item.
numbers for bulk materials are also referenced in the
Description column of the line item entry for the item to
(2) PART NUMBER column. Indicates the
be manufactured/fabricated.
Detailed fabrication
primary number used by the manufacturer (individual,
instructions for items source coded to be manufactured
firm, corporation, or Government activity), which controls
the design and characteristics of the item by means of its
3895-372-34.
engineering drawings, specifications standards, and
inspection requirements to Identify an item or range of
c. ASSEMBLY
INSTRUCTIONS .
Detailed
items.
assembly instructions for items source coded to be
assembled from component spare/repair parts are found
(3) STOCK NUMBER column. This column
lists the NSN for the associated part number and
make up the assembly are listed immediately following
manufacturer identified in the PART NUMBER and
the assembly item entry or reference is made to an
CAGEC columns to the left.
applicable figure.
(4) FIG.
column.
This column lists the
d. KITS. Line item entries for repair parts kits
number of the figure where the item is identified/located
e. INDEX NUMBERS . Items which have the word
(5) ITEM column. The item number is that
BULK in the figure column will have an index number
number assigned to the item as it appears in the figure
shown in the item number column. This index number Is
referenced in the adjacent figure number column.
a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in
Change 1 4