Table 3-1. Operator/Crew Preventive Maintenance Checks and Services.
B - Before
D - During
A - After
W - Weekly
M - Monthly
OPERATOR PMCS - M919 CONCRETE MOBILE MIXER BODY
ITEM TO BE INSPECTED
FOR READINESS REPORTING
Procedure: Check For And Have Repaired
Equipment is not Ready/
Filled Or Adjusted As Needed
Item number of column shall be used as
a source of item numbers for the "TM"
Number" column on DA Form 2404,
Equipment Inspection and Maintenance
work-sheet, in recording results of
Within designated interval, these checks
are to be performed in the order listed.
Perform weekly as well as before PMC's
if you are the assigned driver but have
not operated the vehicle since the last
weekly, or you are operating the vehicle
for the first time.
Visually inspect wiring and connectors
for obvious damage, breaks or fraying.
Make sure all clearance lamps are
working, pull out head-lamp switch on
truck instrument panel and check
Visually inspect tanks and bins
Cracked, broken welds.
for obvious damage, weld breaks.
Check all mounting tie downs and