TM 5-3895-369-14
Table 7-1. Equipment Data - CONT.
Engine Specifications - Continued
Cylinder Head - cont.
Valve Springs
Free Length
...................................................................
Inclination - maximum ................................................
Spring Tension - minimum
.........................................
Rocker Lever Bore .........................................................
Rocker Shaft Diameter.................................................
Camshaft
Diameter at Peak of Lobe
Intake - minimum
.........................................................
Exhaust - minimum ......................................................
Lift Pump - minimum ..................................................
Journal - minimum........................................................
End Play ...........................................................................
Tappet Stem Diameter
........................................................
Lube Pump
Gerotor Tip Clearance - maximum.............................
Port Plate Clearance - maximum .................................
Body Bore Clearance . maximum
................................
Turbocharger
Shaft Bearing Diameter - minimum
............................
Shaft End Play
................................................................
Radial Clearance ............................................................
Injection Pump Gear Backlash
..........................................
Camshaft Gear Backlash.....................................................
Lube Pump Gear Backlash
.................................................
Cooling System
Capacity .................................................................................
Fuel System:
Fuel Tank Capacity ..............................................................
Fuel Injector Pump
.............................................................
Governor
...............................................................................
Fuel Injectors........................................................................
Hydraulic System
Hydraulic Tank Capacity
....................................................
Hydrostatic Pump Capability
.............................................
Hydrostatic Motor Capability
............................................
Electrical
Batteries .................................................................................
Starter
....................................................................................
Alternator..............................................................................
Lighting
.................................................................................
Additive Instrumentation/Horn .........................................
Additive System
Pump Capability...................................................................
Motor
.....................................................................................
Spray Bar...............................................................................
2.190 in. (55.63 mm)
0.039 in. (1.0 mm)
65.0 to 72.2 lb (289.32 N) compress to a height of
1.94 in. (49.25 mm)
0.7480 to 0.7500 in. (19.000 to 19.051 mm)
0.7456 to 0.7470 in. (18.938 to 18.975 mm)
1.852 in. (47.040 mm)
1.841 in. (46.770 mm)
1.398 in. (35.5 mm)
2.1245 in. (53.962 mm)
0.007 to 0.011 in. (0.17 to 0.29 mm)
0.627 to 0.629 in. (15.936 to 15.977 mm)
0.007 in. (0.1778 mm)
0.005 in. (0.127 mm)
0.015 in. (0.381 mm)
0.432 in. (10.97 mm)
0.001 to 0.003 in. (0.03 to 0.08 mm)
0.012 to 0.018 in. (0.30 to 0.46 mm)
0.003 to 0.013 in. (0.08 to 0.33 mm)
0.003 to 0.013 in. (0.08 to 0.33 mm)
0.003 to 0.013 in. (0.08 to 0.33 mm)
6 gallons (23 I)
55 gal. (208.2 1)
Mechanical, external
Mechanical, internal
Mechanical, pressure activated
42 gal. (159.9 1)
17.5 gpm (66.23 Ipm)
10.0 gpm (37.85 lpm)
Two - 12.volt
24 volt (solenoid attached).
24 volt/45 amp.
24 volt
12 volt
210 gpm at 605 rpm (maximum)
Hydraulic, variable speed
External, rotor hood mounted, 21 valve
1-8