5-44. TURBOCHARGER REPAIR (CONT).
Install split ring (12) on oil slinger (11).
Scribe mark on impeller end of turbine shaft and on oil slinger must be aligned to ensure balance of
turbine shaft. Failure to do so will result in damage to turbocharger.
Install oil slinger (11) and align oil slinger in line with balance mark.
(1 I) Install seal ring (13) in diffuser (6).
Position diffuser (6) on turbine shaft (7).
Adhesive causes immediate bonding on contact with eyes, skin, or clothing and also gives off harmful
vapors. Wear protective goggles and use in well-ventilated area. If adhesive gets in eyes, try to keep eyes
open; flush eyes with water for 15 minutes and get immediate medical attention.
(13) Apply anti-seize compound to threads of four screws (10).
Align matchmarks and install diffuser (6) with four screws (10). Tighten screws 50 lbs-in. (5.7 N·m).
Impeller has left-handed threads. Remove correctly or damage to turbine shaft and nut will result.
Install impeller (9) with locknut (8). Align balance marks on impeller and turbine shaft (6). Hold impeller
and tighten nut 120 lbs-in. (14 N-m).