Spilled hydraulic fluid is slippery. Clean
up spilled fluid immediately or injury to
personnel may result.
Place suitable container with a
5 gallon (19 liters) capacity under flow
control valve to catch spilling fluid.
Brake pedal assembly removed
(1) Disconnect hydraulic hose (1) from flow
control valve (2) and move hose out of way,
1 of 12 screws was removed with ground
from clutch housing (5). Discard
Clutch and drive assembly weighs 175 lbs
(237 kg). Attach a suitable lifting device
prior to removal to prevent possible injury
(3) Attach suitable lifting device to clutch (5).
(4) Remove two locknuts (6), four washers (7), and two screws (8) from left clutch mount (9) and mounting
bracket (10). Discard locknuts.
(5) Remove two locknuts (11), four washers (12), and two screws (13) from right clutch mount (14) and
mounting bracket (15). Discard locknuts.