5-29. ENGINE OIL PAN REPLACEMENT/REPAIR (CONT).
(1) Install gasket (13) and suction tube (12)
with four screws (11 and 10). Tighten screws
216 lb-in (24 N·m).
Adhesive sealant causes immediate
bonding on contact with eyes, skin, or
clothing and also gives off harmful vapors.
Wear protective goggles and use in well-
ventilated area. If adhesive gets in eyes, try
to keep eyes open; flush eyes with water for
15 minutes and get immediate medical
(2) Coat both sides of gasket (6) with sealant
compound and install with printed side on
engine block (7).
(3) Install oil pan (5) with 40 washers (4)
and screws (3). Tighten screws 216 lb-in
(4) Install two washers (9 and 2) and plugs
(8 and 1). Tighten plugs 30 lb-ft
Follow-on Maintenance: Fill engine with engine oil (para 4-24).
END OF TASK