4-136. DATA PLATES REPLACEMENT.
This task covers:
Tool kit, general mechanic's: automotive
Drilling rivets while the battery is connected can cause electrical shock. Disconnect battery before
using any electric tool.
Use protective clothing. Goggles or safety glasses are recommended. Loose metal can fly up and
cause eye injury.
Care should be taken when drilling rivets. Damage to surrounding components is possible.
This task is for reference only. It will never be necessary to remove all data plates at one time.
(1) Using drill bit size comparable to rivet (1)
size, drill out rivets (1) from front of data
plate (2). Discard rivets.
(2) Remove data plate (2) from component.
Installation. Position data plate (2) on
component and install with rivets (1).
END OF TASK