4-74. INSTRUMENT PANEL GAUGE REPLACEMENT (CONT).
(c) Remove gauge lamp (47) from
(d) Remove two nuts (49),
from instrument panel (9). Discard
(5) To remove fuse holder, proceed as follows:
(a) Remove two wires (50 and 51) from
fuse holder (52).
(b) Remove cap (53), fuse (54),
jamnut (55), and fuse holder (52) from
instrument panel (9).
(1) To install fuse holder, proceed as follows:
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(a) Apply silicone sealant around fuse
(b) Install fuse holder (52) in instrument panel (9) with jamnut (55).
(c) Install fuse (54) and cap (53) on fuse holder (52).