(4) Install wire (11) in terminal block (12) and
tighten screw (10) securely.
(5) Install back-up horn lead (8) in ignition
switch (9) with lockwasher (7) and nut (6).
(6) Install linkage (3 and 4) in brackets (5) with
jamnuts (1 and 2).
Adjust throttle control cable for full stop-
(1) To tighten throttle/pump cables: Turn
top and bottom jamnuts to the
(2) To loosen throttle/pump control cable:
Turn top and bottom jamnuts to the
Connect negative battery cables
END OF TASK