4-31. VALVE COVER REPLACEMENT.
This task covers:
TM or Para
Tool kit, general mechanic's: automotive
Air inlet pipe removed.
Turbocharger air inlet
Packings, preformed (6)
General Safety Instructions
Gaskets, valve cover (6)
If engine has recently been in operation, allow
time to cool before performing procedure.
(1) Remove filler cap (1) and six screws (2).
(2) Remove six preformed packings (3) from
screws (2). Discard packings.
when removing covers or damage to
equipment may result.
(3) Remove six valve covers (4) and valve cover
gaskets (5). Discard gaskets.
(1) Install six valve cover gaskets (5) and valve
(2) Install six preformed packings (3) on
(3) Install six valve covers (4) with screws (2). Tighten screws 216 lb-in (24 N ·m).
(4) Install filler cap (1).