ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
ITEM TO BE INSPECTED
PROCEDURE: Check for and have repaired, filled, or adjusted as needed
PERFORM ALL OPERATOR PMCS FIRST
Cooling and Air Flow (Gas Engine)
Clean cylinder and head fins (Ref.
a. Check filter element and clean. (Dry type, Diesel Engine) (Ref.
b. Replace filter element (Dry type) (Ref.
c. Service oil bath cleaner (Gas Engine) (Ref.
a. Clean and service batteries (Ref.
b. Check wiring harness for corrosion or bare wires.
c. Check all lights for proper operation.
Transmission Hydraulic Tank and Components
a. Check level and inspect for leaks (Ref.
b. Drain fluid, change filters and refill (Ref.
c. Inspect hydraulic cylinders for proper operation and leaks. Tighten
leaking packing or report to DS Maintenance. (Ref.
d. Inspect pumps and motors for leaks and proper operation. (Ref.
Report defective pumps or motors to DS Maintenance.
Steering Pump and Components
a. Check fluid level (Ref.
b. Drain, flush, refill system.
c. Inspect lines and hoses.
Final and Tiller Drives, Shafts and Bearings
Inspect for proper operation and loose mounting.