PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED OR
EQUIPMENT IS NOT READY/
ADJUSTED AS NEEDED
All PMCS listed within are based on DA PAM 750-40, Reliability Centered
Maintenance (RCM) Logic.
Perform weekly as well as before PMCS if: a. You are the assigned operator but have
not operated the equipment since the last weekly.
b. You are operating the equipment for the first time.
Your Safety and the Safety of Those Around You Depends Upon YOU Using Care
and Good Judgment in the Operation of This Machine. Know the Positions and
Functions of ALL CONTROLS Before Attempting to Operate the Equipment.
Do not operate the equipment in an enclosed area unless exhaust gases are piped
outside. Inhalation of exhaust fumes can cause serious Illness or Death.
Read and observe all warnings and cautions in the front of your operators manual
before starting this machine.
Do not start or operate Asphalt Pump/Engine without liquid in the pump body or
damage to the pump seal will result.
Perform all daily and/or weekly lubrication of the Mixer, Rotary Tiller as called out in
Section 2, Subsection 15, Pages 15-1 through 15-3 of your Operation and Maintenance
Repair Manual, Number SP358.