Cleaning Inspection and Repair.
(2) Remove 24 bolts, bevel washers and lock-
(1) Clean all parts with cleaning solvent.
washers holding ring gear in place on drum.
(2} Inspect all parts for wear and damage,
(3) Use cutting torch to remove ring gear.
Replace worn or damaged parts.
b. Installation. Replacement ring gear is supplied
c. Installation. Install drum rollers and shaft in
in half sections. Install new ring gear onto drum using
reverse of numerical sequence as illustrated in figure 8-2
bolts and washers removed from old ring gear.
8-4. Drum Ring Gear