TM 5-3895-342-34
CHAPTER 6
REPAIR OF SKIP, SKIP VIBRATOR ASSEMBLY,
AND SKIP HOIST ASSEMBLY
Section I. SKIP, AND SKIP VIBRATOR ASSEMBLY
(2) Inspect the skip for wear and damage.
6-1. General
Repair or replace excessively worn or damaged skip.
The closed end skip with arched cover plate elevates to
49 degrees in 49 degrees in 7 seconds. The cam and
lever type skip vibrator is enclosed in an oil tight case.
6-3. Vibrator Assembly
The skip vibrator operates with a frequency of 1100
a. Removal.
pulsations per minute.
Remove skip vibrator assembly
b. Disassembly.
Disassemble skip
vibrator
6-2. Skip
assembly in numerical sequence as illustrated in figure
b. Cleaning, Inspection and Repair.
(1) Clean the skip thoroughly with water and
a stiff bristled brush.
6-1